Detailed Product Description

Water Well Drilling Rig SPC600ST is a truck mounted rotary drilling rig. Equipped with proper drilling devices this rig 
can be used for other drilling technologies. The model is mainly for hydrological geology and water well drilling in clay, 
sand and bedrock layers. It can also be used for construction of underground tunnels, ventilation holes, etc.
The rig can be installed on the chassis of "STEYR" truck with 10 driving wheels for good off-highway performance and driving on bad roads.
The rig is compact in structure, centralized in control and equipped with high pressure and high volume mud pump. 
Pressure increase and decrease mechanism is insulting in drilling efficiency.
 
Drilling depth: 600m
Diamond of hole: Hole opening Φ500 mm hole ending Φ190 mm
Driving drill rod: 108x108x7315mm
Drill rod inside: Φ89x6000mm, Φ73x6000mm
Effective height of drilling tower: 15m, 11m
Nominal load of main hook: 25t
Main hoist single cable tension: 44kN
Nominal pressure increase and decrease of cables: Increase 196kN 
Decrease 135kN
Stroke of pressure increase and decrease: 7.6m
Rotation speeds of rotary table: Normal 27, 49,80,131,208rpm. Reverse 35rpm.
Maximum through hole diameter of rotary table: Φ505 mm
Power source(diesel engine): Model BF6L913C 141kw/2500rpm
Model 6135AN-1 100kw/1500rpm
Mud pump BW1100
Dimensions(in transportation status): 14180x2500x4230mm
12000x2500x4230 mm
Weight : 27t